kvgciuon

Moderator: Angel

Post Reply
lmiller7298
Newbie
Newbie
Posts: 1
Joined: Wed Jun 17, 2009 1:13 am

New bulb & ballast, clicking noise & red light???

Post by lmiller7298 » Wed Jun 17, 2009 1:19 am

I recently replaced the bulb and ballast in my Samsung HL5687W with new parts from a reputable parts store. When I replaced both, and plugged the tv back in the tv is making a clicking noise every 2-3 seconds non-stop along with the red light on front of tv flashing off and on. I have made sure the lever on the back of the tv is either in the up or down position, neither one made a difference. I have made sure to clean all parts inside as best I could. I am just lost as to what the problem could be. Does anyone have any suggestions??? Thanks!!!

User avatar
Angel
Site Admin
Site Admin
Posts: 446
Joined: Sat Apr 04, 2009 1:52 am

Re: New bulb & ballast, clicking noise & red light

Post by Angel » Wed Jun 17, 2009 4:21 pm

Hi lmiller.

If you're hearing a clicking noise the problem is your ballast. Maybe you got a defective one. As far as I know there's no other device inside your TV that could make that noise.
The best "Do It Yourself" site for all types of Displays!

Wimlok
TV Wizard
TV Wizard
Posts: 481
Joined: Fri Apr 24, 2020 10:59 pm

kvgciuon

Post by Wimlok » Thu Nov 17, 2022 8:13 pm


Post Reply

Return to “Akai DLP Discussion”