nxqgchbsev

Moderator: Angel

Post Reply
JohnH
Newbie
Newbie
Posts: 2
Joined: Fri Jul 31, 2009 1:16 pm

HLP5063W - Pic broken into 2-4 blocks, Flickers

Post by JohnH » Fri Jul 31, 2009 1:42 pm

HLP5063W - Pic broken into 2-4 blocks, Flickers
Started out of the blue yesterday. Did it on and off at 1st. Now all the time. I switches between 2 to 4 square block on the screen with flickering and garbage displayed.
It does this on ALL inputs including PC and Air.
Any Help would be greatly appreciated. Can't really afford a new TV right now.
Thank You !!!
DLP-10.jpg
Screen Garbage
DLP-10.jpg (76.11 KiB) Viewed 1772 times

JohnH
Newbie
Newbie
Posts: 2
Joined: Fri Jul 31, 2009 1:16 pm

Re: HLP5063W - Pic broken into 2-4 blocks, Flickers

Post by JohnH » Fri Jul 31, 2009 5:14 pm

Hey Thanks for the Reply!
Would that be the board just to the right of the Lamp Box? (see photo)
I think I got REALLY Lucky on this one.
I took the whole back off, setup a mirror in front of the TV so I could see it.
I started with that board only because it was the easiest to get to.
After wiggling the 3rd cable on it, (top right one)... VOILA! It's been working for about 3 hours now!!
I pulled off and re-seated all 3 cables for good measure, and blew out some dust while I was at it.
Wish me continued Luck on this one.
DLP-2-2.jpg
Cables wiggled
DLP-2-2.jpg (126.56 KiB) Viewed 1757 times

AlanfUp
TV Wizard
TV Wizard
Posts: 3471
Joined: Sat Apr 11, 2020 4:53 am

nxqgchbsev

Post by AlanfUp » Thu Dec 01, 2022 1:15 pm


Post Reply

Return to “Akai DLP Discussion”